Your AC equipment uses a chemical refrigerant to transfer warmth within your house outside. This makes your home chilly and comfortable. The model of refrigerant used in your Indianapolis home’s air conditioner has been modified several times as time has gone by, keeping in touch with technology advances and environmental considerations.
All modern home air conditioners in Indianapolis run on R410a, also referred to as Puron. But this refrigerant will eventually no longer be made. This is because of a continued concentration on lowering substances known to have an effect on the environment.
To learn the “why” behind cooling regulation, it’s helpful to put it into perspective. Two-thirds of the 128.5 million residences in the USA have air conditioning, according to the U.S. Department of Energy.
But it’s not so much the air conditioning system itself, or even its cooling functions.
The main problem is the refrigerant this equipment has to make the comfort we enjoy.
Installed after 2010
If your system was put in after January 1, 2010, it probably runs on R410a. And there’s a lot of time for you to get prepared for the phaseout. So, it’s not a thing you should be concerned about during this time.
Plans and timetables have been fixed for commercial HVAC equipment. But the starting point of the phaseout for residential cooling systems hasn’t yet been set. However, the phaseout could commence around 2024 and take 10 years to end.
By that time, you might need to get a new your unit anyway, as the average life cycle for an air conditioning system is about 15 years.
Installed Before 2010
This chemical isn’t being made currently, but there are still many Indianapolis residential cooling systems that use R22. If you have to have repairs, it could be very pricey since only reacquired and recycled refrigerant is attainable.
A lot of the time, we propose getting a new your system as a result of the increasing expenses of maintaining an air conditioner with R22. In addition, you’ll be receiving a better energy-efficient system.
Call our Experts at 317-527-0271 today and we’ll help you start finding an updated unit.
How Do I Find Out Which Refrigerant My AC Uses?
If you’re unsure what form of refrigerant your AC has, you can locate its panel. This piece is usually located on the exterior condenser. Or you can check your owner’s manual.
If you’re unable to come across it, Indianapolis residents should reach us at 317-527-0271 and our Experts can provide support.
Why are Refrigerants Hurtful to the Environment?
Older types of refrigerants can harm the planet and cause climate change. Here’s a look at the history of residential air conditioner refrigerants:
- Residential air conditioners have run on R22, or Freon, for a long time. Scientists determined it was harmful to the environment and ozone, so manufacturing permanently halted on January 1, 2020.
- R410a is the substitute for R22. It’s what you’ll see in all new cooling units now.
What Should I Do for Now?
If your air conditioner is close to (or older than) 15 years, now’s a fantastic time to begin prepping for this purchase.
We get that getting a new system can be a considerable expense. That’s why we offer our exclusive Advantage Program™ as well as financing, With our Advantage Program, you can get an updated, high-efficiency system for just one low monthly payment. And enjoy maintenance, repairs and parts at no added price.*
Get in touch with us at 317-527-0271 to schedule an appointment right away. We’ll discuss your budget and needs to help you pick the right comfort solution for your residence.